Digital Wireless Microphone System
A digital complete radio link that offers several decisive advantages: unobtrusive, simple operation, lightning-fast setup, extremely compact and transportable, and-the most important thing-a crystal clear sound and transmission quality. Ideal for videographers of all kinds, YouTubers, Vloggers, journalists and much more. RØDE uses the latest Series III 2.4 GHz digital technology for wireless GO, which is extremely insensitive to Wi-Fi and Bluetooth interference, can be used free of charge and free of charge and offers a range of up to 70 meters.
Sender and receiver each have an integrated LiPo-battery, which allows full charging of up to 7 hours of operation. The modules are switched on and off via a small push-button on the back, which must be kept pressed for 2 seconds in order to prevent an accidental actuation. For both modules, there is a USB-C connector on the side, which charges the battery from a USB power supply or a hub. Even a stationary operation is possible: in this case, the modules can be permanently fed via the USB-C socket. If required, up to 8 systems can be used in parallel.
The 4 cm wide and 31 gram light clamp transmitter has an inconspicuously integrated miniature condenser microphone with spherical characteristic, which is perfectly matched to voice transmission. In addition, a 3.5 mm TRS jack (double mono) is available in order to use an external model instead of the built-in microphone. Wireless GO in combination with the HS2 Nackenbügelmikrofon is also ideal as a radio link for Saalanlagen. Use with a VideoMic or Lavalier microphone is also conceivable. 2 blue LED displays provide information about the state of charge and connection status. Indispensable for outdoor shooting: the enclosed fellwind protection, which can be fitted with its two small pins safely and comfortably in front of the microphone.
The receiver module also has a clamp, but can also be pushed directly onto the flash shoe of a camera. A small color LCD informs you about the signal level, the pre-attenuation and the charge level of both the transmitter and the receiver. With the dB-pushbutton, the pre-attenuation can be activated in order to oversteer the microphone input of the camera or, respectively, in the case of noisy signal sources. of the recorder used. The signal can be lowered either by 6 dB or 12 dB, before it is output via the 3.5 mm TRS lateral link.
The Wireless GO comes with two fur windscreens (one as a reserve); a short 3.5 mm TRS jack spiral cable to connect the receiver's output to the microphone input of the following device; two USB cables (A on C) and one transport case.
- ultra-compact and feather-easy
- charging and registration-free 2.4GHz band
- simplest operation
- Clock transmitter TX with integrated microphone (ball capsule)
- 3.5 mm TRS socket for external microphone
- Range transmitter: 70 m (free line of sight)
- receiver RX for clamping or flash assembly
- RX with switchable pre-attenuation (0 dB,-6 dB, -12 dB)
- LCD for level, connection status, pre-attenuation and charge level
- Power supply: internal LiPo battery (both TX and RX)
- Battery capacity: 7 hours, charging via USB-C socket
- up to 8 Systems can be operated simultaneously
- 3.5 mm SC2 and 2x Fellwindschutz in delivery
- two USB cables (A on C) and transport case included in the scope of delivery
You might also like